;      This program is free software: you can redistribute it and/or modify
;    it under the terms of the GNU General Public License as published by
;    the Free Software Foundation, either version 3 of the License, or
;    (at your option) any later version.

;    This program is distributed in the hope that it will be useful,
;    but WITHOUT ANY WARRANTY; without even the implied warranty of
;    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
;    GNU General Public License for more details.
;
;    You should have received a copy of the GNU General Public License
;    along with this program.  If not, see <http://www.gnu.org/licenses/>.

; This may be used for personal use, no commercial use is allowed without permission.

; Updated December, 30, 2011

;=============     www.ChromationSystems.com       ============

; ==============   For Kits, Projects, Parts        ============

; == Please Support Future Projects by Visiting the Store or Donating ==

Breakout boards for controlling LEDs with a TTL PWM signal. No current control, 
just logic level MOSFETs used for switching. Don't forget to control the current with
resistors or other methods.

These are just examples possible output boards, constant current circuits or constant current
regulators could also be used. Please see the datasheet for info. Or contact for details or help
choosing.


Supplied in this zip are 

- Eagle Files for Common Anode Lowprofile, Common Anode, and Common Cathode Breakout boards
- PNG files for low-profile Board

R1, R2, R3 are gate resistors for the MOSFETs, 220ohm or so, depending on MOSFET
R4, R5, R6 are 10k pull downs for the MOSFETs
Q1,Q2,Q3 are Logic Level MOSFETs, such as FDP8880 or RFP12N10L

Please help support this and future projects by
Buying a Kit from my Store or Donating

